GPO PR100 Mode D'emploi page 13

7. G ently release the elastic band and remove your finger from the
hole. The band should now be securely attached to the drive shaft.
8. Remove the ties securing the tone arm.
9. P lug the supplied AC adaptor into the base unit and into a
wall socket.
10. Use the provided RCA cable to connect the base unit to the
amplifiers.
11. P lace a vinyl record onto the turntable.
12. T urn the unit on using the Power On/Standby button.
13. Select PHONO and the correct record speed.
14. A uto-Stop, ON & OFF
• Set the button to "OFF" , there will be no movement.
• Set the button to "Auto-Stop", turntable will automatically stop
when the end of the record is reached for 33 rpm records.
• Set the button to "ON' , turntable will keep moving for both 33 rpm
& 45 rpm records
15. R elease the tone arm holder, lift using the lever and move it to
your preferred location on the vinyl.
16. Gently lower the tone arm to begin playback.
17. I f the turntable does not spin, ensure that the elastic band is
correctly attached to the drive shaft as shown in the image above.
GPO PR100_user_Manual EU_v4 - Sept 2021.indd 13 GPO PR100_user_Manual EU_v4 - Sept 2021.indd 13
13
28/09/2021 12:47 28/09/2021 12:47