Using A Loop System - Audio Service microConnect Set Mode D'emploi

30
If you press without an audio device connected to it, micro-
Connect will search for a connection to other audio sources.
STEREO SOCKET
P

USING A LOOP SYSTEM

USING A LOOP SYSTEM
Your microConnect is equipped with a telecoil. This is intended for
using induction loops, e. g. in churches, theaters or in a lecture room.
This function must be activated by your hearing system specialist.
Press for about 3 seconds to turn the microConnect on.
Press to change to the loop receiver (refer to table
„Changing the audio source" in chapter „Basic functions"). You
can now hear the sound from the loop system through your
hearing systems.
The hearing systems will switch automatically to the telephone
program when your phone rings and will change back to the loop
system after hanging up the phone.
31