SNOWJOE sunjoe MJ408E Manuel D'utilisation page 8

Fig. 3
Upper handle
Upper handle
bolt
Lower handle
4. Secure the upper handle by tightening the upper handle
knobs on the ends of the upper handle bolts (Fig. 4).
Fig. 4
Upper handle
knob
5. Clip the cord into the cable clips on the handle.
Grass Collection Bag Assembly + Fitting
The grass collecting bag prevents grass clippings being thrown
across your lawn as you mow.
NOTE: When using the grass collection bag, do not assemble
the side discharge chute or the mulching plug.
1. The mower has two small gaps near its wheels, which are
for hanging the grass collection bag's rod ends (Fig. 5).
Fig. 5
Upper handle
bolt
2. To fit the grass collection bag, lift the ejector flap with one
hand. With the other hand, hook the grass collection bag's
rod end on the small gaps (Fig. 6).
Fig. 6
Upper handle
knob
Side Discharge Chute Assembly + Fitting
Use the side discharge chute on your mower when the grass is
too tall to mulch or when side discharging is preferred.
The grass clippings produced by the side discharge chute are
noticeably larger by those produced by the mulching plug.
NOTE: When using the side discharge chute, do not assemble
the grass collection bag or the mulching plug.
1. Lift up the side discharge door.
2. Align the grooves on the side discharge chute with the
pins on the underside of the door, and hook the grooves
on the pins (Fig. 7).
8
The small
gap
Ejector flap
The small
gap
Rod ends
Grass
collection bag