Service & Support - SNOWJOE sunjoe MJ408E Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Storage
Follow the steps below to prepare the lawn mower for storage:
1. Disconnect the power supply to the lawn mower.
2. Clean the lawn mower with a damp cloth or hand brush.
3. Inspect the lawn mower carefully for worn, loose,
or damaged parts. Check connections and screws and
tighten if necessary. Pay special attention to the mower
blade and replace/sharpen if it shows signs of wear.
Refer to the Maintenance section.
4. Store the lawn mower indoors in a dry, clean, and cool
area out of the reach of children. Do not store the unit next
to corrosive materials, such as fertilizer and rock salt.
5. Wipe the extension cord to remove any foreign
substances, such as oil or stains. Replace the extension
cord immediately if it is cut or damaged in any way.
6. Wind the cord in a series of equal loops to prevent it
from tangling.
7. Do not cover the lawn mower with a solid plastic sheet.
Plastic coverings trap moisture around the lawn mower,
which can damage the unit.
Service + Support
MJ408E electric lawn mower requires service
If your Sun Joe
®
or maintenance, please call the Snow Joe
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
Model + Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal affixed to the housing or handle
of your lawn mower. Copy these numbers into the space
provided below.
®
+ Sun Joe
®
13
Record the following numbers from the housing or handle of your
new product:
Model #:
M J 4
0 8 E
Serial #:

Publicité

Table des Matières
loading

Table des Matières