Ec Declaration Of Conformity; Technical Data - Black & Decker KA330E Mode D'emploi

ENGLISH
You can check the location of your nearest authorised repair
agent by contacting your local BLACK+DECKER office at the
address indicated in this manual. Alternatively, a list of author-
ised BLACK+DECKER repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com

Technical data

Input voltage V
ac
Power input
W
-1
Oscillations (no load)
min
-1
Orbits (no load) min
Sanding base surface
mm
Weight
kg
L (sound pressure) 83.5 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 94.5 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a
8
(Original instructions)
KA330E
(Type 1)
230
270
10,000 - 26,000
5,000 - 13,000
90 x 187
1.8
2 2
) 7.2 m/s , uncertainty (K) 1.5 m/s
h

EC declaration of conformity

MACHINERY DIRECTIVE
%
KA330E
BLACK+DECKER declares that these products described
under "technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-4
These products also comply with Directive 2014/30/EU
and 2011/65/EU. For more information, please contact
BLACK+DECKER at the following address or refer to the back
of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of BLACK+DECKER.
BLACK+DECKER Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD, United Kingdom
R.Laverick
Engineering Manager
05/08/2014