Detaching The Lens / Attaching The Lens; Detaching The Lens; Attaching The Lens - Panasonic ET-ELT30 Mode D'emploi

Detaching the lens / Attaching the lens (continued)
* The illustration for the next procedure uses PT-EZ590 as an example.

Detaching the lens

Lens release button fixing screw
Lens release button fixing screw hole
i) Lens release button
ii)

Attaching the lens

Red marks
Guide groove
Projection lens guide
Lens release button fixing screw
J
The lens release button is held down by using the lens release button fixing screw (sup-
plied in the accessories of the projector), and the projection lens cannot be removed.
When mounting it to the projector, refer to the steps 1) to 2) of "Detaching the lens".
Before removing the projection lens, if the lens release
button cannot be released the lock even if you press
it, proceed the step 1) and 2).
1) Place the projector upside down on a soft
2) Use a Phillips screwdriver, remove the
3) Turn the projection lens completely in the
iii)
z
Projection lens
1) Align the red mark on the projection lens
Guide groove
Projection
lens guide
Projection lens
2) Turn the projection lens clockwise until it
z
cloth.
lens release button fixing screw by turn-
ing it in the lens release button fixing
screw hole in the counterclockwise direc-
tion.
counterclockwise direction while press-
ing the lens release button to detach the
lens.
Attention
Attach the supplied lens caps before storing the
lens.
with the red mark on the projector, and
insert the projection lens to the end.
clicks.
Attention
Turn the projection lens counterclockwise to
confirm that it does not come out.
ENGLISH - 5