Bushnell Tour X 201540 Mode D'emploi page 8

PINSEEKER WITH SLOPE +/-
™ ™
When the red faceplate is attached, Bushnell's patented Slope Technology
is displayed. The Slope +/-™ mode will automatically compute an angle
compensated range based upon distance and slope angle determined by
the laser rangefinder and built-in inclinometer. This data is then combined
with internal algorithmic formulas dealing with average club use and ball
trajectories. The angle compensated range provides direction on how to play
the shot (i.e. add distance if an incline, subtract distance if a decline).
Switch to the black faceplate, and your Tour® X Jolt® conforms to USGA
Rule 14-3, with the Slope angle compensated ranging feature removed.
EXCHANGE TECHNOLOGY
HOW TO USE SLOPE +/-
™
Once in this mode, you will see a " ° " in the field of view informing you that you are in the Slope +/- Mode. Press
the POWER button to obtain distance to the flag or other objects. Once the range is displayed, continue to hold the
POWER button down for approximately 2 seconds while holding the aiming circle on the flag and keeping the unit
as steady as possible so as to allow the inclinometer enough time to measure slope. Then release the POWER button.
Once you have released the power button, a degree of angle and compensated range will be displayed beneath the
standard distance as seen below.
In the example on the next page, the true distance is 162 yards, slope is +4 degrees, and the compensated range is 173
yards. The " " symbol means "Play-As", so instead of playing as 162 yards, "play-as" 173 yards.
8