Beha-Amprobe ALC-110-EUR Manuel De L'utilisateur page 8

• If the Product is used in the vicinity of equipment that
generates electromagnetic interference, the display
may become unstable or the measurements shown may
be subject to large errors.
• Do not subject the jaw to unreasonably strong shock,
vibration or force.
• If dust gets into the top of the jaw, remove it
immediately. Do not close the jaw when dust is trapped
in its joints as the sensor may be damaged.
UNPACKING AND INSPECTION
Your package should include:
1 ALC-110-EUR Leakage Current Clamp Meter
2 1.5 V AAA batteries
1 User manual
1 Soft carrying case
If any of the items are damaged or missing, return the
complete package to the place of purchase for an exchange.
Note: Batteries do not come installed. Please refer to the
Battery Replacement section for further instructions.
FEATURES AND APPLICATIONS
Features
• CAT III 600 V safety rated
• Leakage clamp acc. IEC/EN61557-13, VDE 0413-13
• Low influence of external low frequency magnetic
fields @ I
operating class 2, ≤ 30A/m
• True-rms measurements for best accuracy when
measuring complex, non-sinusoidal waveforms
• Highest resolution of 0.001 mA, measure up to 60 A:
Range: 6 mA, resolution of 0.001 mA
Range: 60 mA, resolution of 0.01 m
Range: 600 mA, resolution of 0.1 mA
Range: 6 A, resolution of 0.001 A
Range: 60 A, resolution of 0.01 A
• Selectable limits: 3.5 mA, 10 mA, 12 mA, 0.25 mA, 0.5 mA
• Selectable filter function to remove unwanted noise:
- appliance filter (acc. IEC/EN 61557-16),
- 50/60 Hz filter
- no filter
• Frequency range 15 Hz to 1 kHz to cover railway and
industrial application
• Max and data hold
• Mechanical jaw lock
• 30 mm jaw opening
• Auto backlight
• Auto power off
Applications
• Measurement of earth leakage current.
• Measurement of differential leakage currents.
• Measuring leakage current through the earth (PE)
conductor.
• Tracing the source of earth leakage current.
• Measurement of current consumption of appliances in
service or customer service sector without interruption
to the circuit.
3.5 mA ... 600 mA / 40 Hz to 1 kHz:
N
4