Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Standards

CE standard conformity
Pool heat pumps meet the following standards:
Electromagnetic compatibility:
Safety requirements for low voltage equipment:
Pressure Equipment:
Noise production:
Harmonized standards:
Electrical connections
French standard installation reference:
Safety
Although this product contains all safety requirements, it may still present dangers such as:
Electrically controlled parts
Parts moving with automatic start-up (fan)
Cutting edges (evaporator)
In order to avoid accidents, prevent close access the appliance by children and pets. Never cover the
appliance whilst in operation and never put your fingers, or other objects inside.
Never turn on the appliance with any of its panels removed.
Pressure controller
Heat pumps are provided with HP pressure controller set at 30 Bar.
Utilization limits
To ensure the heat pump has been correctly sized, the manufacturer must have been previously contacted with a
selection file (available on demand) in order to validate such selection.
This heat pump models range are designed to operate from 0°Cto +35°C (50°F to 95°F) air temperature using a pool
cover.
If the machine is used to work with an ambient temperature below 0°, particularly for high water temperatures, it is
advised to ad an electrical heater (ask your seller).
Regarding product selection that has not been validated by the manufacturer and working outside the above ranges;
the manufacturer dissociates its responsibility regarding any lack of performance.
Before installing the heat pump, you will have checked that the impedance of your swimming pool electricity
power supply shall not be more than 0.042 Ω.
Ask your electricity provider if necessary.
If the electricity provider can not adjust it, it could translate into a tension reduction on the power supply for
few seconds when the heat pump starts up.
Maximum water pressure : 2 bars (29 PSI).
Correct packing and storage position.
- 19 -
2004/108/EC
2006/95/EC
97/23/CE
200/14/CE
NF EN 60335.1,2.40
NF C 15 100.

Publicité

Table des Matières
loading

Produits Connexes pour Cillit PoolPAC 6

Ce manuel est également adapté pour:

Poolpac 9Poolpac 11Poolpac 14Poolpac 16

Table des Matières