Marmitek Connect 310 UHD Guide Utilisateur page 5

1. Use an HDMI cable to connect the HDMI sources (such as game
consoles, Blu-ray players and Digital TV Decoders) to the HDMI ports
marked "HDMI input".
2. Use an HDMI cable to connect the TV to the HDMI port marked
"HDMI output".
3. If required, connect the IR receiver to the "IR" input in order to
continue to operate it when it is positioned out of sight, for example,
in a closed cabinet. Remember to position the IR receiver itself within
the remote control's line of sight.
4. The Connect 310 UHD™ is energy efficient and is powered by the
connected HDMI devices, thus requiring no power adapter.
5. Pull the plastic strip from the remote control's battery compartment to
activate the battery and remove the protective film from the top.
5. Use
Switching between connected HDMI devices
The Connect 310 UHD™ allows you to choose which HDMI source is
displayed on the TV. If you turn on one of the HDMI sources, it will
automatically switch to the correct input. If multiple HDMI sources are
turned on, the Connect 310 UHD™ will automatically switch to the HDMI
source that was activated last. If you want to select another HDMI source,
please use the remote control or the "Select" button on the front.
Note: Automatic switching must be supported by the HDMI source. If it is
not supported, you should manually select the appropriate HDMI source.
Connect 310 UHD™ 5