Publicité
Les langues disponibles
Les langues disponibles
7.4 Setting the safety level (Fig. 1+8)
• Set the appropriate darkening shade before the welding procedure (see the following
table). The darkening shade may be manually adjusted from 9 to 13 by twisting the dark-
ening regulator (2) on the outside of the helmet.
m ATTENTION! The darkening regulator (2) has the setting position "grind". If the dark-
ening regulator (9) is set to this position the automatic darkening is deactivated. Only use
this setting when you do not wish to use the welding helmet for welding. The automatic
darkening then is no longer active.
Table for setting the protection levels
Welding
1.5
6
Process
SMAW
MAG
TIG /
GTAW
MIG
(heavy)
MIG
(light)
PAC
PAW
4
• SMAW: welding with sheath electrodes
• MAG: welding with metal active gas
• TIG/GTAW: welding with inert gas
• MIG (heavy): welding of heavy metals
• MIG (light): welding of alloys and light metals
• PAC: plasma cutting
• PAW: plasma welding
m WARNING! If the Auto-Darkening Filter does not darken when the arc is struck, immedi-
ately stop welding and consult the owner's manual.
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
10 15 30 40 60 70 100 125 150 175 200 225 250 300 350 400 450 500 600
8
9
8
9
8
9
5
6
7
8
Arc current (amperes)
10
11
10
11
10
11
9
10
11
10
11
9
10
11
12
9
10
11
12
13
12
13
12
13
12
13
14
12
13
14
13
12
14
14
GB | 25
Publicité
