Scheppach AWH380 Traduction Des Instructions D'origine page 20

We cannot accept any liability for damage or accidents which arise due to a failure to follow
these instructions and the safety instructions.
2. Layout (Fig. 1+2)
3. Helmet casing
4. Darkening regulator
5. Locking button for headband (side)
6. UV/IR Filter
7. Protection pane
8. Arc sensor
9. Solar panel
10. Headband top
11. Headband rear
12. Headband front
13. Welding filter
14. Rear pane
15. Adjustable headband botton (back)
16. Tilt angle adjustment lever
3. Scope of delivery
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packaging and transport bracing
(if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport damage.
• If possible, store the packaging until the warranty period has expired.
m ATTENTION! The device and packaging materials are not toys!
Children must not be allowed to play with plastic bags, film and small parts! There is a risk
of swallowing and suffocation!
1x Auto Dimming Welding Helmet
1x Operation manual
20 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58