Publicité
Les langues disponibles
Les langues disponibles
• Severe personal injury and/or blindness may occur if the user fails to follow the afore men-
tioned warnings and/or fails to following the operation instructions.
• Maintain labels and nameplates on the tool. These carry important safety information.
• Stay alert, watch what you are doing, and use common sense.
m IMPORTANT! When the welding helmet is turned off, not being used and/or stored,
always keep the helmet with filter sensors downward. Other wise this may drain the battery
usage.
• Inhalation hazard: Welding and plasma cutting produce toxic fumes:
• Exposure to welding or cutting exhaust fumes can increase the risk of developing certain
cancers, such as cancer of the larynx and lung cancer. Some diseases that may be linked
to exposure to welding or plasma cutting exhaust fumes are:
- Early onset of Parkinson's Disease
- Heart Disease
- Ulcers
- Damage to the reproductive organs
- Inflammation of the small intestine or stomach
- Kidney damage
- Respiratory diseases such as emphysema, bronchitis, or pneumonia
Use natural or forced air ventilation and wear an approved respirator to protect against the
fumes produced to reduce the risk of developing the above illnesses.
m WARNING! If the Auto- Darkening Filter does not darken when the arc is struck, immedi-
ately stop welding and consult the owner's manual.
• Use impact resistant safety goggles and ear protection at all times when using this welding
helmet.
• Inspect the filter lens frequently. Immediately replace any scratched, cracked, or pitted
cover lenses or filter lenses.
m WARNING! Materials that come into contact with the wearer's skin may cause allergic
reactions in people with sensitive skin.
m WARNING! If protection against high-speed particles at extreme temperatures is
required, the eye protection chosen must be labelled with the letter T directly after the
letter for the impact intensity, i. e. FT, BT or AT. If the letter for the impact intensity is
not followed by the letter T, the eye protection may only be used against high-speed
particles at room temperature.
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 23
Publicité
