Publicité
2.2 Déclaration d'enregistrement
Watson-Marlow Limited
Falmouth
Cornwall
TR11 4RU
England
1. Manufacturer:
Watson Marlow Ltd
Bickland Water Road
Falmouth
TR11 4RU
UK
2. Person authorised to compile the technical documentation:
Nancy Ashburn
Design and Engineering Director
Watson Marlow Ltd
Bickland Water Road
Falmouth
TR11 4RU
3. All models and versions of the PF7/PF7+ series of peristaltic filler with all approved pumpheads, tubing and
accessories.
4. The essential Health and Safety requirements (Annex 1) of the Directive have been applied and fulfilled and the
relevant technical documentation has compiled in accordance with part B of Annex VII of the directive. This unit is also
in compliance with the following directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
ROHS Directive EU 2016/863
5. We undertake to transmit, in response to a reasoned request, by appropriate national authorities, relevant information
on the partly completed machinery identified above, and shall be without prejudice to our intellectual property rights.
The method of transmission shall be by mail or email.
6. In accordance with the Machinery Directive 2006/42/EC this unit must not be put into service until the final machinery
into which it is to be incorporated has been declared in conformity with the provisions of the directive where
appropriate.
Signed for and behalf of:
Watson Marlow Ltd
Falmouth, 01 August 2020
Simon Nicholson, Managing Director, Watson-Marlow Limited
Watson-Marlow Fluid Technology Group Telephone +44 (0) 1326 370370
A Spirax-Sarco Engineering plc company
Notice d'instruction de l'unité de remplissage péristaltique PF7/PF7+ avec tête de pompe
QC14
EU declaration of incorporation
10
Publicité
