Handling Discs; Turning The Player On; Turning The Player Off; Changing The Image Aspect Ratio - Clarion VT800B Manuel D'utilisation

All manuals and user guides at all-guides.com

Handling discs

•
To keep a disc clean, do not touch the play side (non-label side).
•
Do not attach sticky notes to or put tape on a disc.
•
Keep discs away from direct sunlight and heat.
•
Store discs in a protective disc case.
•
Before playback, wipe the disc outwards from the center with a clean
cloth.

Turning the player on

1. Turn the ignition to either ACC or ON.
2. Press the power button ( ) on the player or on the remote.
If no disc is in the drive, it displays: "NO DISC."
4. To change input sources, press SRC and alternate among A/V input sources: DVD-
IN, AV IN1 (fi rst additional audio-video source) and AV IN2 (second audio-video
source). Additional AV sources must be connected.
Note:
You cannot insert a DVD into the slot if you've selected an
alternate audio-video source (AV IN1 or AV IN2).

Turning the player off

To turn the power off, press the power button ( ).
If a CD or DVD is playing when you turn the power off and back on again, the player
continues playback from where you stopped.
Note:
Once the player is turned off, you cannot eject a DVD or CD left in
the slot.

Changing the image aspect ratio

A common display setting to change is screen mode, which controls the aspect ratio
used to display images.
Do not leave the headphones in a place that is subject to direct sunlight or extreme
temperatures.
An IR receiver in the headphones that is exposed to direct sunlight for an extended
period of time may cause poor sound quality. Let the headphones cool off before you
use them.
1 4 VT800B/VT1000B/VT1000T/VT1500B
OFF
ACC
ON