Opening The Monitor; Closing The Monitor - Clarion VT800B Manuel D'utilisation

All manuals and user guides at all-guides.com

Opening the monitor

1. Press the release button to open the overhead monitor screen.
Looking up at the monitor from directly below
2. Gently swing the LCD down and adjust the angle for viewing.
150° maximum angle
The LCD opens to a maximum angle of 150 degrees. Do not
attempt to open it further.
The monitor turns on automatically when you fully open it (assuming the ignition
switch is on or in the ACC position).

Closing the monitor

Gently push the back side of the LCD until it clicks into the overhead housing. The
monitor turns off automatically when you return it to the closed position.
Note:
When closing the LCD panel, do not let cords or other items get
caught between the LCD and the overhead housing. Doing so can
seriously damage the TFT screen.
For safety, close the LCD panel when you are not using it.
VT800B/VT1000B/VT1000T/VT1500B
Release button
ON OFF DOOR
Monitor open
CAUTION
1 3