Publicité
Les langues disponibles
Les langues disponibles
INTRODUCTION
Thank you for deciding to purchase the Aidapt Adjustable Bed Cradle. The
Adjustable Bed Cradle is manufactured from the finest material and components
available, when installed and used correctly it is designed to give many years of
reliable trouble-free service. The Adjustable Bed Cradle can be fitted to single,
double, queen and king size beds.
The Height Adjustable Bed Cradle from Aidapt is a metal frame designed to keep
bed covers away from the body. It is useful for those suffering from ulcers or skin
irritation.
N.B. This equipment must be installed by a competent person and a risk
assessment undertaken as to the suitability of the bed cradle for the particular
user and user's bed.
INSTALLATION
The base is worked between the mattress and bed base and can be used at the side
or end of the bed.
HEIGHT ADJUSTMENT
The height of the Adjustable Bed Cradle can be adjusted to suit the client's
requirements. To adjust the Adjustable Bed Cradle simply remove the two grey e-
clips and lift to the required height ensuring that you do not exceed the last pre-
punched hole on the base of the frame.
Once the desired height is achieved, re-insert the e-clips into the pre-punched
holes, ensuring that both clips pass completely through the tube frame, the inner
tube and out the other side and are in place securely as shown below.
CORRECT
INCORRECT
Assembly and Operating Instructions
Ver. 2 06/2012 (2287)
2
Publicité
