aidapt VY440 Instructions De Montage Et D'utilisation page 4

MAINTENANCE
Please check the cradle periodically for any signs of damage and if in doubt contact
your supplier.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all
components for their safety.
This includes:
Tightness of all nuts/bolts/castors and other screw in/bolt in/push in
•
components.
Upholstery (if applicable) for security, splits, exposed staples, etc.
•
Straightness and integrity of all tubing and welds.
•
If in any doubt, please do not issue or use, but immediately contact your supplier
for service support.
When reissuing, a risk assessment must be undertaken as to the suitability of the
Bed Transfer Aid for the particular user and user's bed.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part
of or establishing any contractual or other commitment by Aidapt Bathrooms
Limited or Aidapt (Wales) Ltd or its agents or its subsidiaries and no warranty or
representation concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using
this product; as the user you must accept liability for safety when using the
product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 • Web: www.aidapt.co.uk
Email: accounts@aidapt.co.uk • adaptations@aidapt.co.uk • sales@aidapt.co.uk
Assembly and Operating Instructions
4
Ver. 2 06/2012 (2287)