Publicité
Les langues disponibles
Les langues disponibles
LEGEND
ITEM 1 = M10x1.25x100mm LONG HEX HEAD BOLTS.
ITEM 2 = M10 PLAIN WASHERS (x2).
ITEM 3 = LW0001 (M12 SHAKE PROOF WASHERS) (x2).
ITEM 4 = B0063 with CS066 (10mm) (BOTH CRASH PROTECTORS) (x2).
ITEM 5 = S0191 ( SPACERS 51.5mm LONG) (x2).
Page | 4
ITEM 6 = 100mm LENGTH OF SELF ADHESIVE FOAM (x2).
ITEM 7 = M0275 MOUNTING BLOCK (x2).
ITEM 8 = 8mm PLAIN WASHERS (16mm O/D) (x4).
ITEM 9 = M8x30mm LONG CAP HEAD BOLTS (x4).
ITEM 10 = BC0002 Bobbin Caps (x2).
PICTURE 'D'
Near side (left side as you sit on bike)
•
Remove side fairing.
•
Remove the two frame bolts in arrowed position in picture 'D' (using 14mm socket).
•
Stick the self-adhesive foam to the mounting faces of the mounting block (it helps prevent
marking of the frame).
•
Offer one of the mounting blocks (M0275) up to the motorcycle in position shown in picture 'D'.
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
MARKING TOOL
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
PICTURE 'E'
R&G Racing
www.rg-racing.com
Email:
info@rg-racing.com
Publicité
