How To Use; Control Panel; Washing A Load Of Laundry - RCA RPW210 Manuel D'instructions

How To Use

Control Panel

Remain(min)
Large
Medium
Small
Load Size
9 8 7 6 5 4
1 - ON/OFF
Press the ON/OFF button once to turn ON the power of
again to turn OFF the unit.
2 - START/PAUSE
Press the START PAUSE button once to the start the /
Press the button during operation to pause the cycle. Press again to
continue the cycle.
3 - Temperature
Press this button to select water temperature for
Cold light only indicates Cold Water selection
Both Cold and Hot light together indicate Warm Water selection
Hot light only indicates Hot Water selection
4 - Program
Press this button to select your desired washing program.
Heavy (light) Quick
Jeans (light) Anti-wrinkle (Flash)
Normal (light) Air dry
5 - Digital display
The digital display will show and count down the estimated minutes for the
wash cycle selected. Or, if Delay Start is set, the display will count down the
hours until the cycle begins, and then change to a minute countdown for the
wash cycle.
6 - Delay
Press this button to set your desired time to delay start the washer.
1
ON/OFF
Heavy
3 2
the washer. Press
wash cycle.
washing.
(Flash)
(Flash)
17
How To Use
7 - Load Size
Press this button to set your washing load size. Your setting will decide the
water level throughout all steps in the cycle.
8 - CONTROL LOCK
The control lock function can help to prevent children from changing the
operation status of the unit.
9 - Function
Press this button to select cycle steps included in your setting cycle. The
related light will be ON indicating that the step is selected.
Normally, all Wash , Rinse and Spin steps are included with all lights ON.

Washing a load of laundry

Step 1: Power on your washer
Press the ON/OFF button to power your wash on.
ON/OFF
Step 2: Load your washer
Before loading your laundry, be sure to take out coins,
keys and other hard objects, and close all zippers to
WARNING
prevent the clothes from damage.
Sort laundry by fabric type, soil level, color and load size as
needed. Refer to the Fabric Care Chart in the APPENDIX.
You can fill the tub with dry, unfolded clothes ,but DO NOT
OVERLOAD the tub. Load the tub no more than 3/4 full.
Step 2: Load your washer
To ensure good cleaning results do not overload the tub, especially when washing
heavily soiled loads. Never load the tub more than 3/4 full.
Overloading may reduce washing efficiency, cause excess wear, and possibly
cause creasing or wrinkling of items in the load.
WARNING
Note: To add a forgotten item:
1. Press the START/PAUSE button to pause the washer.
2. Wait for the tub to stop turning, then open the door.
3. Add the item, close the door, and then press the START PAUSE button. The
cycle will resume.
/
18