Hilti UH 700 Mode D'emploi page 7

The power tool may be used only in a dry environment.
Do not use the power tool where there is a risk of fire or explosion.
2.2 Chuck
Keyless chuck or
Key chuck with key
2.3 Switches
Control switch with electronic speed control
Lockbutton for sustained operation
Function selector switch
Forward / reverse switch
2.4 Grips
Vibration-absorbing side handle with depth gauge
Vibration-absorbing grip
2.5 Possible applications
Applications with hammering action
Possible applications
Hammer drilling in masonry
Applications without hammering action
Applications
Drilling in metal
Drilling in wood
Mixing dispersion paint, thin ce-
ment mortar, tile adhesive and plas-
ter with mixing paddles
2.6 Items supplied as standard
1 Power tool with side handle
1 Depth gauge
1 Dust shield
1 Chuck key (with keyed chuck)
1 Operating instructions
1 Hilti toolbox or cardboard box
Insert tool type
Carbide-tipped drill
bits with smooth
shank
Insert tool type
Drill bits with smooth
shank
Stepped drill bits
Twist drills
Forstner drill bits
Hole saws
Auger bits
Flat bits
(not self-cutting)
TE‑MP 80
TE‑MP 110
Drill bit sizes, 1st
gear / 2nd gear
-
Drill bit sizes, 1st
gear / 2nd gear
Max. 13 mm (½")
Max. 35 mm (1³/₈")
Max. 30 mm (1³/₁₆")
Max. 45 mm (1²⁵/₃₂")
Max. 80 mm (3⁵/₃₂")
Max. 30 mm (1³/₁₆")
Max. 40 mm (1⁹/₁₆")
Recommended
Recommended
Drill bit sizes, ham-
mer drilling
Max. 16 mm (⁵/₈")
Drill bit sizes, ham-
mer drilling
1.5...8 mm (¹/₁₆" to
⁵/₁₆")
Max. 8 mm (⁵/₁₆")
Max. 30 mm (1³/₁₆")
Max. 40 mm (1⁹/₁₆")
Max. 40 mm (1⁹/₁₆")
-
Max. 40 mm (1⁹/₁₆")
-
-
3
en