Electrolux FI5004NA+ Notice D'utilisation page 18

18 www.electrolux.com
140-190 mm
1
Alignment height of 870 mm
• If using a 190 to 220 mm plinth, make
a cut out as shown.
• If using a plinth higher than 150 mm
but less than 190 mm, cut the height
compensation strip supplied with the
appliance to the required depth and fit
it between the plinth and the
ventilation grille.
• If using a 150 mm plinth, fit the
complete height compensation strip.
• If the appliance is installed at the end
of a row of units, insert foot E to hold
the plinth in place.
All manuals and user guides at all-guides.com
3
2
100-150 mm
30-100 mm
1
E
8.7 Installing the appliance
1. Fit the appliance into the recess.
2. Rotate the bracket of 180° in order to
obtain the right position ( 2). The
position (1) is on the delivery.
3. Fix it to the wall with the appropriate
bracket.
2
1
2