sauermann SI-CA 130 Mode D'emploi page 4

2 Analyzers description
1
2
3
4
5
6
3 Operating temperature, protection of the instruments and information about storage
• Operating temperature: from -5 to 45 °C (23 to 113 °F)
• Protection: IP42
If the instrument is stored outside the operating temperature (for example in a van, a
warehouse,...) please let the analyzer acclimate to room temperature for at least 15 minutes
before starting and operating the analyzer.
If the ambient temperature is lower than 10 °C (50 °F), the analyzer should be acclimated
to ambient temperature before performing measurements.
4 First start-up
DO NOT insert the gas probe in the flue/chimney/stack.
Keep pressed for 3 seconds to turn on the analyzer.
Tap "Start".
1. Min-DIN connection for CO and CO
probe
2. Thermocouple connection for air
7
temperature
3. Thermocouple connection for flue gas
temperature
4. P- connection
5. P+ connection
6. Gas connection
7. USB connection
Select your country
then tap "Next".
Select your
language then tap
"Next".
2
Set the date then
tap "Next".