TaoTronics TT-HP006 Mode D'emploi page 6

Once the sensor is activated and an object is detected over 1 meter
away, the Cree light will turn on automatically at 70% brightness. If an
object is detected within a 1 meter range, the Nichia light will turn on
automatically at 70% brightness.
Status Indicator and Energy Saving Mode
When the battery is between 50% to 100% full, the color of the status
indicator will be green.
When the battery is between 10% to 50% full, the color of the status
indicator will be yellow.
When the battery has less than 10% power left, the color of the status
indicator will become red.
Caution
• Please do not dismantle the product by yourself, always ask a
professional electrician or authorized technician for repairs.
• Please do not remove the battery with wet hands.
• Do not put this unit near extreme heat sources, moisture,
or corrosive substances.
• Regularly clean the headlamp.
• Please store in a dry and cool place if not using for a long period of time.
Trouble Shooting Guide
Problem Possible Cause
No power
The headlight
The light is not
does not light up turned on
The function lock
is activated
Light failure Light component fails
Warranty
This product is covered by the TaoTronics Product and Labor Warranty for 12
months from the date of its original purchase. If manufacturing defects
occur, please contact TaoTronics support (support@taotronics.com)
immediately to launch a warranty claim. We will instruct you on how to
return the defective unit back to us for repair or replacement. No return will
be accepted without seller authorization
Solution
Insert fresh batteries
Check "How to Use"
section above
Disable the lock
Please contact the
TaoTronics Support Team
07/08