Publicité
Les langues disponibles
Les langues disponibles
How to Us
1.Using the Headlamp
Status Indicator
(Red + Yellow + Green)
Button A
Distance Sensor
Power On / Off + Memory Function
When all LEDs are OFF, press Button A or Button B once to turn on the
Cree light or the Nichia light, respectively, at 100% brightness. If this is not
your rst time turning on the headlamp, both the Cree and Nichia lights
have a memory function and will return to the brightness setting of the
last time it was turned on. Press its button again turn the light off.
BACK
Button B
Continuous Brightness Adjustment
When a light is on, press and hold its button switch for 3 seconds and the
brightness will gradually reach its highest / lowest level. When the highest or
lowest brightness is reached, the LED light will ash twice. No change will
happen if you keep pressing the button.
Lock Function
When all lights are off, press and hold either Button A or Button B for 3
seconds to lock the buttons (Cree light ashes 3 times). Once locked, all
buttons are disabled. If the buttons are bumped or pressed, the Cree light
will ash once. Press Button A or B again for 3 seconds to disable the lock
(the Cree light ashes 3 times).
Distance Sensor
When all LEDs are OFF, press the Button A and B together; the Nichia light
ashes twice and the distance sensor is activated. Press Button A and
Button B together to turn off the sensor; all LEDs will turn OFF.
When the Cree light is ON, press Button A and B together; the Cree light
ashes twice and the distance sensor is activated. Press Button A and
Button B together to turn off the sensor; the Cree light will stay ON.
When the Nichia light is ON, press Button A and B together; the Nichia light
ashes twice and the distance sensor is activated. Press Button A and
Button B together to turn off the sensor; the Nichia light will stay ON.
05/06
Publicité
