GUARDO Action Cam 4 Mode D'emploi page 21

6. SETTING DATE AND TIME
To set correct date and time, please follow these steps:
• Long press MENU button (5 or 7) to open the menu
• Press Mode button (6) to switch to the system settings menu
• Use the Wifi Button (7) and MODE Button (6) until 'Date & Time'
• Press Record Button (1) to select 'Date & Time'
• Adjust date and time by using the Wifi Button (7) and MODE Button (6) (change digits)
and the Mode Button (6) (swap to month, date, hour, ...)
Start video recording:
• Make sure the Guardo Action Cam 4 is turned on and in Video Mode.
• Press the Record Button (1) once. The red LED indicator (12) and 'REC' will start
flashing slowly and a timer will appear = start of recording.
Note:
• Shooting view angles are slightly different in different working modes of the video
camera.
• To pause the video recording, press the MENU / Wifi Button (7) 1x shortly.
Stop video recording:
• Press the Record Button (1) once again to stop recording. The red LED indicator (12)
and the timer will turn off.
Note:
• When the memory card is full, the Guardo Action Cam 4 will automatically stop
recording. Your recordings will be saved, before the camera turns off! When 0:00
flashes on your screen, this indicates your SD card is full and recording is no longer
possible. You need to empty or format your SD card (via computer or camera) again.
This of course after having copied/saved your photos/footage from the card to another
device such as your computer's hard disk. See 'Format SD Card' .
• When recording continuously over a longer period of time (e.g. 2 hours non-stop), the
footage saved on your Micro SD Card will be split in different sections, 1 section =
max. 4GB/45 min.
OPERATION
21