GUARDO Action Cam 4 Mode D'emploi page 14

1. PLACE MICRO SD CARD
• Make sure a 16 GB Micro SD card
(preferably from a known A-brand), Class
10 (UHS-I) or higher with a minimum
of 15 MB/s writing speed (optionally
available at www.guardo.be.) is inserted
into the Micro SD Card slot (9) before you
start using the Guardo Action Cam 4.
• Make sure you format the Micro SD card
before first use only! You can format the
micro SD card via:
o the camera's menu (see 'System
Settings')
o your computer (see 'Connecting to a
computer' to find out how)
Place the micro SD card into the Micro SD Card slot (9) and press gently with your finger
nail so that it clicks into place. (To remove the Micro SD-card: press the card gently again
with your finger nail so that it pops out).
Note:
• When there is no micro SD card inserted, the camera cannot be used!
• Make sure the capacity of your micro SD card does not exceed 64 GB, Class 10 (UHS-I).
• We suggest to use a 16 GB Class 10 or higher.
2. TURNING ON/OFF
To turn the Guardo Action Cam 4 ON: Press the Power/Mode Button (6) for 2/3 sec. to turn
the camera on. The LCD display (3) will turn ON and you will hear a short beep indicating
that the camera is turned on.
To turn the Guardo Action Cam 4 OFF: Press the Power/Mode Button (6) again for 2/3 sec.
to turn the camera off. The LCD display (3) will turn OFF and you will hear a short beep
indicating that the camera is turned off.
GETTING STARTED
14