Assa Abloy ZI IKON +CLIQ Mode D'emploi page 31

A
At tention!
Working on the door leaf: For work on the door leaf, such as drilling or
cutting, the +CLIQ electronic locking cylinder and the mortise lock must
be removed.
Protect against the ingress of dirt, chips or filings: The +CLIQ electronic
locking cylinder can be damaged from the penetration by chips, filings
or dirt.
Application of force can destroy the locking cylinder: The application
of force, e.g. striking with a hammer, can damage or destroy the locking
cylinder.
Install tension-free: Depending on the installation situation, the +CLIQ
electronic locking cylinder must be installed in such a way as to be free
of stress. The cylinder fixing screw must therefore only be tightened by
hand.
The +CLIQ electronic locking cylinder must be installed in the appro-
priate size: The +CLIQ electronic locking cylinder is produced in multiple
cylinder lengths („Technical data", page 33). Before installation, make
sure that the +CLIQ electronic locking cylinder is in the size matching the
door leaf thickness. The +CLIQ electronic locking cylinder may not protrude
more than 3 mm beyond the fitting surface.
Installation and adjustments according to DIN EN 15684: All com-
ponents must be installed and adjusted in a manner which ensures
conformity with DIN EN 15684.
Assembly EN 31