Displaying Still Images In The Sub Screen; Switching The Input Source Quickly - NEC PlasmaSync 42XM4 PX-42XM4A Manuel D'utilisation

BTM LFT~TOP LFT: Will show the entire image on
the sub screen of picture-in-picture mode.
Side-by-Side
RGB/PC1
POINTER button
Zoom+/- button
POINTER button

Displaying still images in the sub screen

This feature enables display in the sub screen of still images
captured by pressing the SELECT/FREEZE button.
Example: Setting "PIC FREEZE" to "BTM LFT"
On "PIC FREEZE" of "OPTION4" menu, select "BTM
LFT".
SUB. PICTURE
ZOOM NAV
PIC FREEZE
SEAMLESS SW
SELECT1
SELECT2
TEXT INSERT
SEL.
Information
PIC FREEZE Function
* This feature does not function during split screen mode.
* Digital zoom is not available while this function is
operating.
* A further press of the SELECT/FREEZE button while
this function is operating will cancel this function.
* Providing a 2-screen display will cancel this function.
PIC FREEZE settings
OFF: Will not show the still image.
S BY S1, 2: The still images captured by pressing the
SELECT/FREEZE button will be shown on the sub
screen of side-by-side mode.
BTM LFT~TOP LFT: The still images captured by
pressing the SELECT/FREEZE button will be shown
on the sub screen of picture-in-picture mode.
Downloaded From TV-Manual.com Manuals
Picture-in-Picture
or
OPTION 4 4 / 4
PREVIOUS PAGE
: BTM LFT
: BTM LFT
: OFF
: —
: —
: OFF
ADJ. EXIT RETURN
Side-by-Side
RGB/PC1
S BY S1
RGB/PC1
or
S BY S2
RGB/PC1

Switching the input source quickly

This feature enables quick input selection.
After setting ON, press the CLEAR/SEAMLESS SW
button for quick switching between the two selected input
signals.
Example: Set to switch quickly between RGB1 and
RGB2.
On "SEAMLESS SW" of "OPTION4" menu, select "ON".
Select "RGB1" and "RGB2".
* The available sources depend on the setting of input.
Information
SEAMLESS SW Function
* This feature will not function for certain input
combinations. See the table on page En-15.
* After switching to the selected input, please operate this
function.
* This feature will not function during split screen mode.
* When SEAMLESS SW is first turned on, or when
signals being transmitted are changed, there may be a
slight delay due to signal analysis.
SEAMLESS SW settings
OFF: Turns off the SEAMLESS SW function.
ON: When the CLEAR/SEAMLESS SW button is
pressed, input signals will switch quickly according to
the setting of SELECT1 and SELECT2.
En-35
Picture-in-Picture
RGB/PC1
SELECT/
FREEZE
button
RGB/PC1
RGB/PC1
RGB/PC1
OPTION 4 4 / 4
PREVIOUS PAGE
SUB. PICTURE
ZOOM NAV : BTM LFT
PIC FREEZE : S BY S1
SEAMLESS SW : ON
SELECT1 : RGB1
SELECT2 : RGB2
TEXT INSERT : OFF
SEL. ADJ. RETURN
EXIT
RGB/PC1
SELECT/
FREEZE
button
RGB/PC1