Split Screen Operations; Showing A Couple Of Pictures On The Screen At The Same Time; Operations In The Side-By-Side Mode - NEC PlasmaSync 42XM4 PX-42XM4A Manuel D'utilisation

SPLIT SCREEN Operations

Showing a couple of pictures on the
screen at the same time
* There may be some RGB-input signals that may not be
displayed as not all signals are supported.
1. Press the button to select a screen mode from among single
mode, side-by-side, and picture-in-picture.
SINGLE
button
SIDE BY SIDE
button
VIDEO1 RGB/PC1
A B
Note:
Picture A and B on the above screen are not always of the
same height.
Information
Split screen operations may not function depending on
the combination of input signals. In the table below,
" " means Yes, " " means No.
VIDEO1
Pictures
VIDEO1
displayed on
VIDEO2
the left/sub
VIDEO3
screen
HD/DVD1
(Select2) HD/DVD2
RGB/PC1
RGB/PC2
RGB/PC3
Split screen operations may not function
depending on the frequency of the RGB
signals.
Downloaded From TV-Manual.com Manuals
VIDEO1
A
PICTURE IN PICTURE
button
SIDE BY SIDE
button
VIDEO1
Main screen
Sub
screen
PICTURE IN
PICTURE
button
Pictures displayed on the right/main screen (Select1)
VIDEO2 VIDEO3 HD/DVD1 HD/DVD2 RGB/PC1 RGB/PC2

Operations in the Side-by-side mode

To change the picture size, press the cursor
button.
VIDEO1 RGB/PC2
B
A
Side-by-Side2-R
button button button
SINGLE
button
VIDEO1 RGB/PC2
B
A
Side-by-Side4-R
To swap the picture on the right and the left, press the
cursor button.
RGB/PC1
To make the desired picture active, press the SELECT/
RGB/PC3
FREEZE button.
En-15
button button
VIDEO1 RGB/PC2 VIDEO1
A B
button button
Side-by-Side1 Side-by-Side2-L
button button button
button button
VIDEO1 RGB/PC2 VIDEO1
A B
button button
Side-by-Side3 Side-by-Side4-L
VIDEO1 RGB/PC1
A B
button
RGB/PC1 VIDEO1
B A
VIDEO1 RGB/PC1
A B
SELECT/FREEZE
button
VIDEO1 RGB/PC1
A B
or
RGB/PC2
A
B
button
RGB/PC2
A
B