Setting The Power On Mode; Enabling/Disabling The Front Panel Controls - NEC PlasmaSync 42XM4 PX-42XM4A Manuel D'utilisation

"SINGLE", "SIDE BY SIDE1~3" and "PICTURE
IN PICTURE (BOTTOM LEFT~TOP LEFT)".
• Use the and
and "LEFT"/"RIGHT", then use the
to choose from "VIDEO1~3", "HD/DVD1~2" and
"RGB/PC1~3".
DATE
MON
TUE
SAT
*FRI
—
SAT
*
PICTURE IN PICTURE
PROGRAM TIMER
MULTI SCREEN SETTING
MULTI MODE
: BOTTOM LEFT
INPUT MODE
MAIN
SUB
SEL. ADJ.
MULTI REPEAT
Two repeat timers are available.
Each timer has MULTI MODE, WORK TIME and INPUT
MODE functions.
Example:
TIMER1 is set to display RGB/PC1 (MAIN) and
VIDEO1 (SUB) for 4 hours in picute-in-picture mode.
TIMER2 is set to display RGB/PC3 (LEFT) and HD/
DVD1 (RIGHT) for 2.5 hours in side-by-side mode.
On "MULTI REPEAT" of "TIMER", select "ON", then
press the MENU/ENTER button.
The "MULTI REPEAT TIMER" screen appears.
Adjust the items.
TIMER
PRESENT TIME
PROGRAM :
MULTI REPEAT :
SEL. ADJ.
Information
MULTI REPEAT settings
MULTI MODE: Set the input mode to be displayed
while the timer is on.
WORK TIME: Set the time duration of the display.
Time range is from 1 minutes to 4 hours and 15 minutes.
INPUT MODE: Set the signal that will be displayed
within the selected screen.
Select "MAIN" or "SUB" for "PICTURE IN PICTURE
(BTM LFT~TOP LFT)" and "LEFT" or "RIGHT" for
"S BY S1~3". Only one signal is selected for
"SINGLE".
* The two repeat timers run consecutively, i.e., Timer1–
Timer2–Timer1–Timer2.
* When both PROGRAM TIMER and MULTI REPEAT
TIMER are set, priority is given to PROGRAM TIMER.
Downloaded From TV-Manual.com Manuals
buttons to select "MAIN"/ "SUB"
and
PROGRAM TIMER
ON OFF INPUT FUNCTION
08 : 30 10 : 30 MULTI INVERSE
—
- - : - - 18 : 15 —
08 : 30 12 : 15 VIDEO1 WHITE
08 : 30 10 : 00 HD/DVD1 —
—
- - : - - - - : - - —
08 : 30 12 : 15 VIDEO1 WHITE
15 : 30 16 : 00 RGB1 —
SEL. ZOOM ADJ. EXIT RETURN
SIDE BY SIDE
PROGRAM TIMER
MULTI SCREEN SETTING
MULTI MODE
: SIDE BY SIDE1
INPUT MODE
LEFT
: RGB/PC1
RIGHT
: VIDEO1
SEL. ADJ.
EXIT RETURN
MULTI REPEAT TIMER
1 MULTI MODE
WORK TIME
OFF
INPUT MODE
OFF
MAIN
SUB
RETURN 2 MULTI MODE
EXIT
WORK TIME
INPUT MODE
LEFT
RIGHT
SEL. ADJ.

Setting the power on mode

This function sets the input mode and the sound volume
at the time the power is switched on.
buttons
Example: Setting the input mode to "VIDEO2"
On "OPTION3 " menu, select "PWR.ON MODE ", then
press the MENU/ENTER button.
The "PWR.ON MODE " screen appears.
On "INPUT " of "PWR.ON MODE " menu, select
"VIDEO2".
The available inputs depend on the setting of input.
Information
: RGB/PC1
: VIDEO1
INPUT settings
RETURN
EXIT
LAST: Last mode (the input that was last selected at
the time the power was switched off).
VIDEO1, 2, 3: VIDEO input mode.
RGB1, 2, 3: RGB input mode.
HD/DVD1, 2: HD/DVD input mode.
MULTI: Multi screen mode.
Follow the procedure used for PROGRAM TIMER. See
page 29.
PICTURE IN PICTURE
MULTI SCREEN SETTING
MULTI MODE
: BOTTOM LEFT
INPUT MODE
MAIN
SUB
SEL.
VOLUME settings
LAST: Last mode (the volume that was last selected at
the time the power was switched off).
: BTM LFT
: 04H00M
0 to 44: The level of sound volume.
: RGB/PC1
: VIDEO1
: S BY S1

Enabling/disabling the front panel controls

: 02H30M
This function enables/disables the front panel controls.
: RGB/PC3
: HD/DVD1
Example: Setting "ON"
EXIT RETURN
On "CONTROL LOCK" of "OPTION3" menu, select
"ON", then press the MENU/ENTER button.
Information
CONTROL LOCK settings
ON: Disables the buttons on the front panel.
OFF: Enables the buttons on the front panel.
* Even when the CONTROL LOCK is set, the POWER
switch will not be locked.
* This becomes effective when the on-screen menu goes
out.
En-30
PWR. ON MODE
INPUT : VIDEO2
VOLUME : LAST
SEL. ADJ. EXIT RETURN
SIDE BY SIDE
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
: SIDE BY SIDE1
INPUT MODE
: HD/DVD1 LEFT
: VIDEO1 RIGHT
ADJ. RETURN SEL.
EXIT
OPTION 3
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK : ON
IR REMOTE : ON
LOOP OUT : OFF
REMOTE ID : ALL
ID NUMBER : ALL
VIDEO WALL
NEXT PAGE
SEL. ADJ. RETURN
EXIT
PWR. ON MODE
: HD/DVD1
: VIDEO1
ADJ. RETURN
EXIT
3 / 4