Motorola H12 Mode D'emploi page 10

Wearing your headset
See fi gure 3 on page 2.
Your H12 headset is supplied with multiple ear buds. The ear bud is fi tted
onto the end of your headset's earpiece speaker, and placed onto your ear
when using your headset. Your headset's performance is greatly dependent
upon achieving a good fi t on your ear. Therefore, we recommend trying all
the supplied ear buds with your headset.
When fi tting an oval-shaped ear cushion on your headset, be sure the
cushion is pointing towards the microphone.
You can wear your H12 headset on your left of right ear. The headset comes
ready for the right ear.
Placing the headset on your ear:
Placing the headset on the left ear:
Charging your headset
See fi gure 6 & 7 on page 3.
You can only charge the headset via the charging case or the desktop
charger. You cannot plug the Motorola charger directly in the headset.
1. Plug the Motorola charger into the port on the charger case or desktop
charger
2. Place the headset into the charger case or onto desktop charger. Ensure
that that charging contacts on the headset and charging case or desktop
charger connect.
Note: Earhook must be rotated to the orientation as shown on fi gure 6 to
ensure charging contacts connect.
see fi gure 4 on page 2.
see fi gure 5 on page 2.
English
7