Fritz! WLAN Repeater 1750E Installation Et Fonctionnement page 6

Establish a Connection Using WPS Quick Connection
The WPS quick connection is the simplest and fastest way to establish a secure
connection between WLAN devices.
Requirements
 The wireless access point must
support the WPA or WPA2 encryption
standard.
 All of the devices participating in the
wireless network must support WPS
and WPS must be enabled.
In the latest FRITZ!Box models WPS is
enabled by default. In older models,
enable the WPS Push-Button method
in your FRITZ!Box user interface
under "WLAN / Security / WPS - Quick
Connection".
 The SSID (network name) of the
wireless access point must be set to
"visible", and if the MAC address fi lter
is enabled, it must be switched off for
the initial confi guration. Both are con-
fi gured upon delivery of a FRITZ!Box.
10
Establishing a Connection
1. Press the WPS button on the
FRITZ!WLAN Repeater 1750E until the
"WLAN" LED begins fl ashing (see also
page 14 below)
2. Within two minutes, press the button
on your wireless access point that
starts a WPS quick connection.
On AVM FRITZ!Box models this is the
button labeled WLAN, WPS or WLAN/
WPS. For more information, see the
documentation on your FRITZ!Box or
your wireless access point.
3. The FRITZ!WLAN Repeater and your
wireless access point now establish a
secure wireless connection with each
other automatically. The "WLAN" LEDs
on both devices light up and remain
on.
Now you can confi gure the
FRITZ!WLAN Repeater 1750E in a user
interface. For more information, continue
reading from page 13.
Establishing a Connection Using the Online Wizard
The convenient online Wizard guides you step by step through the initial confi guration.
Requirements
 Windows 8.1/8, Windows 7 or Win-
dows Vista must be installed on your
computer.
 The computer must have access to the
Internet.
 The SSID (network name) of the
wireless access point must be set to
"visible", and if the MAC address fi lter
is enabled, it must be switched off for
the initial confi guration. Both are con-
fi gured upon delivery of a FRITZ!Box.
Establishing a Connection
1. Start a web browser.
2. Enter http://en.avm.de/service/
fritzwlan/fritzwlan-repeater-1750e/
confi guration
in the address fi eld of
the browser.
3. Load the Confi guration Wizard for the
FRITZ!WLAN Repeater 1750E on your
computer.
4. Start the Wizard and follow the instruc-
tions on your screen.
Next you can confi gure the
FRITZ!WLAN Repeater 1750E in a user
interface. For more information, continue
reading from page 13.
11