Publicité
Les langues disponibles
Les langues disponibles
Electrical connections
L1-L2 230V a.c. power input
24V d.c. motor
M-N
10-E
24V output
DIP 3 OFF - During movement (e.g. flashing light)
DIP 3 ON - During movement and in the
24V - 3W max. "bar-open" signal lamp
10-5
Power supply accessories (max. 40W):
10-11
- a 24V a.c. with power supply at 230V a.c.
- a 24V d.c. with power supply at 24V d.c.
Pushbutton stop (N.C.)
1-2
Open pushbutton (N.O.)
2-3
The data and information provided in this manual are to be considered susceptible to change at any time without warning, by CAME cancelli automatici s.p.a.
closed position
Contact (N.C.) FOR "re-opening during closure"
2-C1
(Should be short circuited if not used)
Contact (N.C.) of "immediate closure". If not used
2-C5
Dip 8 ON
2-7
- Connector (N.O.) radio and/
4
or pushbutton. See Dip 2 for
7
command type
- Button operation: closure
4
only
7
Connection microswitch deceleration opens (N.C.)
F-FA
Connection microswitch deceleration closes (N.C.)
F-FC
Antenna connection
7
Publicité
