Diffusers; Installation - Cameo CLQS40TW Manuel D'utilisation

SC (sound-controlled strobe)
To activate the sound control mode, press SC and set the microphone sensitivity between 1 and 11 using the + and - buttons as required
(11 levels).
AU
Without function.

DIFFUSERS

Two diffusers are supplied with the lamp, each with a different beam angle (1 x 10° and 1 x 25°). The beam angle of the lamp can be set at
4.5° (without diffuser), 10°, or 25°. Insert the desired diffuser in front of the light-emitting lens and secure it with the supplied securing ring.

INSTALLATION

Thanks to its integrated double bracket, the lamp can be positioned in a suitable location on a level surface. Installation on a traverse is possible
with a suitable traverse clamp (not supplied). Ensure firm connection to the mounting bracket and secure the lamp to the the securing lug (A) with a
suitable safety cable.
Important: Overhead mounting requires extensive experience, including the calculation of the load limit values of the installation material and
regular safety inspection of all installation materials and devices, such as lights and speakers. If you do not have these qualifications, do not attempt
to perform an installation yourself. Refer instead to a qualified professional.
A
11