Diffusers - Cameo H1 D Manuel D'utilisation

DIFFUSERS

The spotlight is supplied with 3 diffusers (1x pre-assembled), which have different dispersion
characteristics (20° [narrow], 35° [middle], 45° [wide]).
The beam angle of the spotlight can therefore be individually adjusted to 20°, 35°, or 45°. Loosen
the four screws (A) on the retaining ring on the front of the spotlight with a suitable tool and
remove the retaining ring from the spotlight. Use a small flat-bladed screwdriver to remove the
diffuser from the retaining ring. Insert the required diffuser in the retaining ring and then secure
the ring to the spotlight with the previously loosened screws.
A
A
A
A
Similar to image
23