How.to.determine.body.fat.percentage; Setting And Storing Data In Memory - Tanita UM-028F Mode D'emploi

HOW TO DETERMINE BODY FAT PERCENTAGE

Setting and Storing Data in Memory

The unit can be operated only if data has been programmed into one of the personal data memories.
1. Turn on the Power
Press the Set button to turn on the unit. The unit will beep to confirm activation,
the Personal data number will be displayed, and the display will flash.
Note: If you don't operate the unit for sixty seconds after the unit has been turned
on, the unit will turn off automatically.
Note: If you make a mistake or want to turn the unit off before you
have finished programming it, press the ON-OFF Key to force quit.
2. Select a Personal data Number
Press the Up/Down buttons to select a Personal data number 1 or 2. Once you
reach the Personal data number you wish to use, press the Set button.
The unit will beep once to confirm.
3. Set Age
The display defaults to Age 30 (range of user age is between 7-99). An arrow icon
appears on the lower left side to indicate Age setting. Use the Up/Down buttons to
scroll through numbers.
When you reach your age, press the Set button. The unit will beep once to confirm.
4. Select Female or Male
Use the Up/Down buttons to scroll through Female ( ), Male ( ) settings, then
press the Set button. The unit will beep once to confirm.
5. Specify the Height
The display defaults to 5' 7.0" (170cm) (range of user is from 3' 4.0" – 7' 3.0" or
100cm – 220cm). Use the Up/Down buttons to specify Height and then press the
Set button. The unit will beep once to confirm.
The unit will beep twice and the display will flash all data (Male/Female, Age,
Height.) three times to confirm the programming. The power will then shut down
automatically.
Checking Your Stored Data
To check your personal data, push DATA (Up arrow)button until your data number
will appear. Your data stored in the scale will then appear.
Eng
MEMORY DATA
SET
5