Publicité
Les langues disponibles
Les langues disponibles
EN
2. Enter the sides into the cell.
46
Agri-TR
2.2 Removal of transport protection
The measurement cell is locked during transport with a protection. It
is recommended to keep the protection with the package and to use
it for any transfer.
To remove the protection, proceed as follows :
Remove the drawer
2.3 Installation of transport protection
To install the protection, turn over the apparatus and verify the
traps of the cell are opened (if not, switch on the Agri-TR and wait
for the end of the selfchecking sequence). Put the protection as
described below, then put back the drawer.
Push down and remove it
1. Insert the protection under the grain deflec-
tor
3. Block the emptying motor
User's manual
07/2015
Publicité
