Replacing The Dust Bag, S-Bag; Replacing The Motor Filter And Exhaust Filter - Electrolux ultrasilencer Mode D'emploi

Masquer les pouces Voir aussi pour ultrasilencer:
Table des Matières

Publicité

1
4
6
9
2 1
1
2192326-10.indd 12
A
B
2
5a
7
10
3 1
English

REPLACING THE DUST BAG, S-BAG™

1
The dust bag, s-bag™ must be replaced latest when
the indicator window is completely red. Read with the
nozzle lifted up.

Fold down the carrying handle. Press the catches on
3
the hose, remove the hose and open the cover.

Lift out the insert holding the s-bag™.

Pull the cardboard to remove the s-bag™ from the
insert. This automatically seals the s-bag™ and prevents
dust leaking out.
 a
Insert a new s-bag™ by pushing the cardboard right
into the end of the groove in the insert.
 b
Attach the insert by placing it on the back pegs in the
bag compartment. Then fold down the insert and close
the cover.
5b
Note. Replace the s-bag™ even if it is not full (it could be obstruc-
ted). Also replace after vacuuming carpet-cleaning powder. Be
sure to use only an original Electrolux dust bags, s-bag™ Classic
or s-bag™ Clinic.
Replacement of the motor filter (Ref.
No. EF54)
should be done with every th replacement of the dust bag,
s-bag™
6
Fold down the carrying handle. Press the catches,
remove the hose and open the front cover.
7
Lift out the insert holding the s-bag™.
8
Pull the motor filter holder upwards until it comes away
from the groove.
8
9
Carefully pull the old, dirty filter out of the filter holder
and replace it with a new motor filter.
10
Reattach the filter holder containing the new motor
filter.
11
Replace the insert holding the s-bag™ and then close
the cover.
Replacement of the exhaust filter
should be done with every 5th replacement of the dust bag,
s-bag™
There are two types of exhaust filter:
11
• Hepa H1 (Ref. No. EFH1)
• Microfilter (Ref. No. EF17)
The filters must always be replaced with new ones and
cannot be washed.*
1
Fold up the carrying handle until it clicks into place.
1
Place your thumbs on the back edge of the lid and
then open the lid by pulling the handle backwards and
upwards with your index/middle finger.
1
Lift out the filter. Insert a new filter and replace the lid
as shown.
14
*A washable filter – HEPA H13 – can be bought as an option.
11/23/06 3:52:38 PM

Publicité

Table des Matières
loading

Table des Matières