Digital centre
Note: How simple it is to read and program
your locomotive decoder
Connect the programming track to the
▶
main track
▶
Place loco onto programming track
▶
Start the Z21 mobile app
▶
Switch to programming mode
▶
Enter the new parameters
▶
Ready!
42
8041500920.indd 42
2.4 Operation of Digital Locomotives
21
The
Digital System is suitable for the control of all locomotives using Roco loco decoders or any
z
21
DCC-compatible decoders. Your
z
The preconfiguration by the factory of all Roco and Fleischmann locos is decoder address 3. If you
use several locos on your system simultaneously, you need to assign a separate decoder address to
each one.
21
With the
Digital System, this is very simple: put the locomotive as the only loco onto the track.
z
Select the locomotive on Z21 mobile app and give it a name and decoder address not yet assigned in
the programming mode. That's it!
All magnetic items (switches, decoupling tracks, signal decoders) equipped with a digital decoder
can be programmed and controlled with the Z21 mobile app just as easily.
Digital System can administer up to 9,999 loco decoders.
14.12.2017 09:48:44