Publicité
Chapitre 4
Résolution des problèmes
Affichage de l'état de l'environnement
Vous pouvez utiliser l'interface de ligne de commande (CLI) afin de vérifier l'état de surveillance de
l'environnement de la Passerelle vocale Cisco VGD 1T3. Pour vérifier l'état de surveillance de
l'environnement, saisissez la commande show environment en mode EXEC privilégié :
Router# show environment
•
•
OL-23640-01
Les éléments affichés ci-dessous apparaissent sur votre console en état de fonctionnement normal.
Le numéro de logement correspond à la carte DFC présente dans ce logement. Les capteurs d'entrée
et de sortie lisent la température de l'air circulant à l'intérieur du châssis.
Router# show environment
Temperature:
Temperature Reading:
Temp at inlet is measured as 25C/77F.
Temp at outlet is measured as 30C/86F.
Temp delta of inlet and outlet is measured as 5C/41F.
Temperature State:
Temperature is in normal state.
Voltage:
Voltage Reading:
MAX6656-1 Internal 3,3 Volt is measured as 3243.
Motherbd 5V is measured as 5228.
CPU Core 1.2V is measured as 1160.
Memory 2.5V is measured as 2476.
MAX6656-2 Internal 3.3 Volt is measured as 3243.
PHY 2.5V is measured as 2243.
HT, Crush FPGA 1.8V is measured as 1786.
PLD 1.5V is measured as 1419.
Voltage State:
Voltage is in 0 state.
Power Supply:
Redundant Power System is present.
PS Input Voltage status:
PS Output Voltage status:
PS Fan status:
PS Thermal status:
PS OverVoltage status:
Environmental monitor experienced the following events:
Power system: "output voltage fail" at 18:45:53 UTC Sat Mar 1 2008.
Les éléments affichés ci-dessous apparaissent sur votre console lorsque le système atteint un état
déclenchant un avertissement :
Router# show environment
Temperature:
Temperature Reading:
Temperature at inlet is measured as 52C/125F.
Temperature at outlet is measured as 64C/147F.
Temperature State:
Temperature is in warning state.
Fans:
Fans temperature delta is measured as 6C.
All fans are running well.
Power Supply:
Redundant Power System is present.
RPS Input Voltage status: normal
RPS Output Voltage status: normal
RPS Fan status: normal
RPS Thermal status: normal
RPS OverVoltage status: normal
normal
Warning - failure
normal
normal
normal
Guide d'installation du châssis de la passerelle vocale Cisco VGD 1T3
Surveillance de l'environnement
4-5
Publicité
