Publicité
Les langues disponibles
Les langues disponibles
CONTROL PANEL FEATURES
1. Output Ready Indicator LED (Green):Illuminates
when the generator is operating normally and indicates
the generator is producing electrical power at the
receptacles.
2. Overload Indicator LED
generator is overloaded which means the generator's
wattage / amperage capacity has been exceeded by
connected electrical devices or by a power surge.
When this occurs, the Output Ready Indicator LED will
go off. The engine will continue to run, but the red
Overload Indicator LED will stay on, and power will no
longer be supplied to connected electrical devices.
To rest the generator:
Remove all applied loads and stop the engine. Review
for any faulty or shorted connections.
Start the generator and reconnect electrical devices
sequentially, allowing the generator to stabilize after
each device is connected. Make sure the total wattage
of connected electric devices are not exceeding
recommended rated output power.
1
2
3
(Red):Illuminates when the
3. Oil Warning Indicator LED (Red):Illuminates
when the engine oil level falls below the safe
operating level and the generator will automatically
shut off the engine. The engine will not start until
the proper amount of oil is in the crankcase.
Page 10
Publicité
