Accessories - Lincoln Electric POWER MIG 180 DUAL Mode D'emploi

C-1
K2525-1 - Spot Timer Kit
Timer kit, when turned on, allows you to set a fixed
weld time so that when the gun trigger is pulled the
machine will weld for a fixed time period up to 10 sec-
onds. Ideal for making consistent spot welds when
welding on thin sheet metal.
K2528-1 - 045 Innershield Kit (For 230V models)
Includes everything needed to weld with .045 diame-
ter Innershield wire.
Magnum™ 100L gun liner, .045 Contact Tip, gasless
nozzle, knurled drive roll, .035-.045 inner wire guide,
and a 10 lb. (4.5kg) spool of .045"(0.9mm)
Innershield® NR®-212 wire.
K2532-1 - Magnum 100SG Spool Gun
Designed to easily feed small 4" diameter (1lb. spools
of) .030 or .035 aluminum wire. Includes gun, adapter
kit, three extra .035 contact tips, gas nozzle, and
spool of Superglaze 4043 .035" diameter welding
wire. Packaged in a convenient carry case.
K2377-1 - Small Canvas Cover
Protect your machine when not in use. Made from
attractive red canvas that is flame retardant, mildew
resistant and water repellent. Includes a convenient
side pocket to hold welding gun.
For additional Optional and Miscellaneous Parts
(See Parts Pages)

ACCESSORIES

Includes an .035/.045
POWER MIG® 180 DUAL
C-1