Cleaning; Disposal; Technical Data - Beurer FC 72 Mode D'emploi

The device shuts off automatically if there is no water left in the device or after 15 minutes.
• Remove the mains plug from the socket.
• After the treatment, wash your face with cold water. Now apply a facial cream or face mask. The
open pores allow the active agents to penetrate deep into the skin.
• Allow the device to cool down for 10 minutes. Afterwards, clean the device as described in
Section "8. Cleaning".

8. Cleaning

Prior to cleaning, make sure that the mains plug has been removed from the socket.
• After each use, empty and clean the water tank and remove any grease or other residue.
• The water tank is dishwasher-safe and can be cleaned in a dishwasher if required.
• After cleaning, place the water tank back in the device.
• Clean the nozzle and the base device with a soft, slightly damp cloth and then wipe dry.

9. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end
of its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose
of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic
Equipment). If you have any questions, please contact the local authorities responsible for waste
disposal.

10. Technical data

Model no. FC 72
Voltage supply 220-240V~50/60Hz
Output 260 W
Protection class II /
Short operation Max. 15 min
13