Publicité
Les langues disponibles
Les langues disponibles
GB
Seals
40
DANGER! Risk of electric shock
Always remove the water boiler from the appliance before filling and always
fill it outside the appliance.
Never pour water into the shaft where the water boiler is installed.
CAUTION! – Risk of property damage
If there are cracks or leaks and the limescale cannot be remedied, the water
boiler must be replaced.
Do not immerse the water boiler in water or other liquids.
Do not put the water boiler in a dishwasher.
1. Push the locking mechanism of the cover forwards.
The cover flips open automatically.
2. Open / unlock the water boiler at the handle and lift it upwards out of the
shaft.
DANGER! Risk of burn injuries
Fill the water boiler with water only.
It is not permitted to use scents or additives. Scents & additives can have a
negative impact on the treatment result, may be harmful to health, or may
emerge from the steam shower as hot liquid or foam.
3. Fill the water boiler with water up to the max marking.
-
The fill level display shows you the water level.
4. Insert the water boiler vertically into the lateral guides in the shaft and push
it down slowly and carefully.
Handle
Do not spill any water in the shaft.
5. To lock the water boiler, press the cover down at the handle.
6. Press the cover down until it audibly clicks into place.
Fill level dis-
play
Shaft
Guide
Important notes on the use of the water boiler
Publicité
