Selecting The Breast Shield Size; Cleaning, Disinfection And Maintenance; Breast Pump Cleaning And Maintenance; Accessories Cleaning At Home - DTF MEDICAL kitett Fisio Pro Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 3
Every KIT EXPRESSION and spare parts available and compatible with the FISIO® PRO breast pump are
presented in Part 8.
NOTE: KOLOR® breast shields, collection container, cap and interface bottle are in polypropylene
and thermoplastic elastomer. KOLOR® breast shields are guaranteed BPA and Phthalate free.
b) Selecting the breast shield size
The FISIO® PRO breast pump is used with the KIT EXPRESSION. The KOLOR® breast shield is available in 4 inner
diameters and 2 «comfort» sizes that adapt perfectly to the breast morphology and guarantee a high level of
comfort.
4 inner diameters: 4 colour codes
KITETT® helps you choose the breast shield using:
- the Kolorama size ruler
Measurements:
Measurement should be taken after breastfeeding or expressing your milk. Alternatively, if your nipple is at
rest, add an extra 2mm around it to select the correct inner diameter size.
The nipple should not feel too constricted neither too free. You should see space around your nipple in order
to let it move easily in the breast shield during pumping. If the breast shield is too tight, it could cause pain,
lesions or compressed ducts. If the breast shield is too wide, less milk will be expressed. A correct comfort size
(S -Small- or L -Large- comfort shape) will improve breast pump efficiency (optimal airtightness).
a) Breast pump cleaning and maintenance
Disinfection is done with a clean and damp cloth that is impregnated with a surface agent disinfectant for
medical devices. Follow the instructions provided by the supplier of the surface disinfectant agent.
Do not use abrasive cleaning agents. Unplug the device before cleaning.
b) Accessories cleaning at home
Accessories concerned:
KOLOR® breast shield
Before using for the first time and after each use:
➊ Disassemble each element.
➋ Rinse every part in contact with the milk in cold water (about 20°C).
❸ Then clean with hot and soapy water.
- the KOLORYOU® application available for free download
3.

Cleaning, disinfection and maintenance

Collection container
2 comfort sizes: S = 76 mm and L = 90 mm
16
Cap

Publicité

Table des Matières
loading

Table des Matières