FMS 1:12 JIMNY Manuel D'utilisation page 8

EN
Overview
[11]
[12]
[13]
[14]
[15]
Specifications
• Product Name: FS-R4A1
• Adaptive transmitter: FS-MG41
• Model Type: Car
• Channels: 4
• Numbers of Light Interfaces: 7
• RF: 2.4GHz ISM
• 2.4G Protocol: ANT
• Antenna: Single antenna
• Input Power: Lipo (2S)/NiMH (5~7Cell)
• BEC Output: 6V/1A
Binding
The receiver automatically enters the binding state once it is powered on.
Press the BIND Key to turn on the transmitter and allow it to enter its binding state. Here, G.LED flashes
quickly, and operator releases the BIND Key.
1. When the receiver is powered on and waits for 1 second, it will automatically enter the binding state if it is
not connected;
2. After the binding is successful, the LED indicator of the receiver is always on.
Notes: (1) Set the transmitter to its binding state first, and then set the receiver to its binding state. If the
binding is not completed within 10s, the indicator light of the receiver will enter its slow flashing state.
(2) If re-binding is successful, all the settings of the car lights will be restored to their default values.
[10] [9] [8] [7] [6]
[5]
[4]
[3]
[2]
[1]
[16] [17] [18] [19] [20] [21] [22]
[23]
[24]
[25]
[1] CH1
[2] CH3
[3] CH4
[4] Left-turn light port
[5] Head light port
[6] Right-turn light port
[7] Head light port
[8] Fog light port
[9] Fog light port
[10] Antenna
[11] Power switch
[12] Battery line "+"
[13] Battery line "-"
• Continuous/Peak Current: 10A/50A
• Data Output: PWM
• Temperature Range: -10℃—+60℃
• Humidity Limit: 20%~95%
• WaterProof: PPX4
• Online Update: No
• Dimensions: 33mm*30mm*12mm
• Weight: About 11g
• Certification: CE, FCC ID: N4ZR4A10
08
[14] Motor port "+"
[15] Motor port "-"
[16] Stickers
[17] LED
[18] Left-turn light port
[19] Right-turn light port
[20] Reversing light port
[21] Brake light port
[22] Taillight port
[23] Signal pin
[24] Power "+"
[25] Power "-"