Schneider Schirme Rhodos Smart Notice De Montage Et D'utilisation page 89

•
While turning the crank, repeatedly move the lever (H) from the "OPEN-CLOSE" to the
"TILT" function position and back so that the parasol is intermittently opened and lifted.
This ensures that the parasol opens properly and with ease.
•
Always open the parasol fully. The parasol is fully opened when the canopy is stretched
taut.
4.2 Tilting parasol
To tilt the parasol, proceed as follows (see also fig. 4- 2):
•
Set the lever to the "TILT" function position (see figure).
•
Turn the crank counter-clockwise to close the parasol.
4.3 Rotating parasol
To rotate the parasol, proceed as follows (see also fig. 4-3):
•
Release the lever from the holder to unlock the rotary plate with the tube (C) as shown in
the figure (1). Rotate the parasol to the desired position (2).
•
Place the lever back in the holder to lock the rotating plate with the tub in position (3).
•
Engage the parasol in the nearest position.
4.4 Closing parasol
88
Strong wind and gusts can damage the parasol
➢ When the parasol is tilted, the surface exposed to wind and
gusts is increased significantly. In windy conditions, always
close the parasol and secure it with the strap.
➢ If the parasol is at an angle, winds and gust can lead to
damage to the parasol structure and might impair its stability.
There is thus a risk of injury.
Rotate the parasol with special caution
➢ Watch the parasol when rotating it.
➢ Avoid contact with obstacles such walls, trees, etc.
Close the parasol with special caution
➢ Do close the parasol in windy conditions.
➢ Ensure that there are no obstacles (walls, table, trees, etc.)
within the closing range of the parasol.