Publicité
Les langues disponibles
Les langues disponibles
power level to 0.
sensor for 2 seconds, the related zone
RESIDUAL HEAT INDICATOR
The power indicator of the hot plate will
display an H when the glass surface
reaches a temperature that could
cause burning.
When this risk disappears,
Warning:
in a short time on the power display.
This showing is related with setup
operation and it does not mean the
Warning:
H indication is used for the safety
purposes in any case. Even if the
power on, H indication appears.
SWITCHING OFF THE DEVICE
time by pressing the general on/off
touch key
H will appear in the zones that are hot.
The rest of the displays will not light up.
Locking of the touch keys
of the cooking hob
To prevent undesired manipulation you
can lock the entire unit, except for the
key
child safety. When the lock is activated,
and
However, remember when the touch
the lock is activated (the lock indicator
On the other hand, if the touch control
is switched off, the locking function
To deactivate the locking function, press
the locking touch key
control will be ready for use.
CHILD LOCK
complicated than key lock. User can
activate key lock via one sensor. But
child lock need a sensor sequence.
The Child Lock is being used to prevent
children from turning on the hob.
Activating Child Lock :
1. The hob is switched on via
2. Any zone should not be selected.
When any zone is not selected,
and
key and minus sensors is hold for 3
seconds at same time. At the end of
this period, a short buzzer sound is
heard
3. After buzzer signal , the
touch key is touched (there is no
and a long buzzer sound is heard
and the Child Lock will be activated
and all power display shows "L".
During Child Lock, if user touch any
Warning : Child lock status is not being
stored. If the energy of the hob is butted,
child lock status could not be preserved.
Deactivating Child Lock :
To be able to deactivate Child Lock, the
Child Lock should be activated before
and all power display show "L"
1.
and
key and minus sensors is hold for 3
seconds at same time. At the end of
the this period, a short buzzer sound
is heard,
2. After buzzer signal , is touched to
the
is no need to keep press for a long
heard and the Child Lock will be
de activated and "Indication will be
Flash Cooking
(Automatic cook start)
This function facilitates cooking as
you do not need to be present while it
is being done. The touch control pre-
programmes the chosen hot plate at
the maximum power and subsequently
lowers it to the desired power level
approximate amount of time (see
Table 1
Automatic Cook
Selected
Start Function
Power
(in minutes)
0
1
2
3
4
5
6
7
8
9
SWITCHING THE AUTOMATIC
COOK START FUNCTION ON
EN
0
1
3
5
7
9
3
4
5
-
7
Publicité
