Publicité
Les langues disponibles
Les langues disponibles
Measuring Insulation Resistance
=
Insulation tests should only be performed on dead circuits.
Check the fuse before testing. To measure insulation resis-
tance, follow the steps below.
1. Insert test probes in the "⊕ " and "
2. Turn the rotary switch to Insulation position.
3. Press the Range button to select the test voltage.
4. Connect the probes to the circuit.
5. Push and hold the Test button to start the test.
The "Test" and " " appear on the display. The secondary
display shows the test voltage applied to the circuit under
test. The primary display shows the resistance.
6. Keep the probes on the test points and release the Test
button. The resistance reading appears on the primary
display until a new test is started or a different function or
range is selected or > 30 V is detected.
" input terminals.
10
Publicité
